News - DIPSEC

Home
News

What is the Preparation Before Install CMM

2024-06-18 10:56

After the measuring machine is delivered to the user, check it carefully and make necessary preparations for installation, such as the installation site, transportation channel, and transportation mea...
The Pressure Influence in Air Bearing of CMM

2024-06-17 16:27

For the CMM air system system, it is necessary to pay attention to the impact of external pressure changes on system stability and measurement accuracy during use, and make timely adjustments and main...
How to Operate Before Starting the CMM

2024-06-14 11:05

The guideway machining precision of CMM is high, and the distance between it and air bearing is small. If there is dust or other impurities on the guide rail, it will cause scratches to the gas bearin...
How to Clean The CMM Grating Ruler

2024-06-13 15:32

High-precision CMM requires work in a dust-free indoor environment, the temperature must be controlled between 18 and 22 degrees, and the air humidity must be controlled between 40% and 70%. Therefore...
What is the Influence in Calibration Result Caused by CMM Probe Inspection?

2024-06-12 11:21

Probe system is a key component of coordinate measuring machine (CMM), which is mainly used for measuring workpiece surface. It is closely related to the working efficiency and accuracy of CMM. Withou...

1 2 3 4 5